Mineral sands
Mineral sands often need oversize, roots and clay balls removed before processing. FlipScreen does this at the face or stockpile, reducing the load on downstream equipment.
Processing mineral sands at the work site
Mineral sands often need oversize, roots and clay balls removed before processing. FlipScreen does this at the face or stockpile, reducing the load on downstream equipment.
Begin by identifying the fraction of mineral sands you want to recover and where each output will go. A compatible FlipScreen attachment combines collection and size separation in the carrier’s working cycle, allowing the operator to place screened material and retained oversize into separate, planned areas.
Choosing a screen for mineral sands
The selected mesh aperture determines which material passes through and which is retained. Match the screen and bucket configuration to the feed characteristics, the carrier’s capacity and the project requirements. A material trial is a practical way to assess the result before committing to a production workflow.
Choose the mesh around the required size fraction for mineral sands, taking account of moisture, abrasion and the amount of fines in the feed. Screening does not crush oversized pieces or replace washing where that is required. Verify grading and other applicable product requirements before using or supplying the screened material.
Plan your mineral sands screening setup
Provide the FlipScreen team with your carrier make and model, hydraulic specifications, expected feed size and the result you need from mineral sands. Include the material’s condition and any site restrictions so a suitable attachment and screen configuration can be assessed. Plan stockpile positions and material movements before work begins to avoid mixing the separated fractions again.
Mineral sands: screening advantages
How it works: Screen raw sand at the mining face or stockpile, removing oversize, organics and clay lumps.
The result: Cleaner feed for wet plants and concentrators.
Interchangeable screens: Pick a screen size to suit your plant feed specification. One FlipScreen, multiple products from the same stockpile.
Why FlipScreen wins: Abrasive sand wears shaker buckets quickly, and stationary scalping screens add another loading step. FlipScreen scalps as it digs.
Screen where it sits: No trucking mineral sands to a fixed plant and back. Float the excavator in with FlipScreen and you're ready to work.
Work in all weather: With the brush kit fitted, FlipScreen handles moist and sticky mineral sands that would stop many other screening attachments.
Plug and play: Thanks to the Smart Valve system there's no complicated hydraulic set-up. Connect to your excavator and the valve looks after pressures and flows.
Bottom line: Well suited to pilot pits, bulk samples, rehabilitation and remote sites.

