Road base
Road base needs the right mix of fines and stone. FlipScreen screens road base on site, removing oversize for a consistent product.
Processing road base at the work site
Road base needs the right mix of fines and stone. FlipScreen screens road base on site, removing oversize for a consistent product.
Begin by identifying the fraction of road base you want to recover and where each output will go. A compatible FlipScreen attachment combines collection and size separation in the carrier’s working cycle, allowing the operator to place screened material and retained oversize into separate, planned areas.
Choosing a screen for road base
The selected mesh aperture determines which material passes through and which is retained. Match the screen and bucket configuration to the feed characteristics, the carrier’s capacity and the project requirements. A material trial is a practical way to assess the result before committing to a production workflow.
Choose the mesh around the required size fraction for road base, taking account of moisture, abrasion and the amount of fines in the feed. Screening does not crush oversized pieces or replace washing where that is required. Verify grading and other applicable product requirements before using or supplying the screened material.
Plan your road base screening setup
Provide the FlipScreen team with your carrier make and model, hydraulic specifications, expected feed size and the result you need from road base. Include the material’s condition and any site restrictions so a suitable attachment and screen configuration can be assessed. Plan stockpile positions and material movements before work begins to avoid mixing the separated fractions again.
Road base: screening advantages
How it works: Screen road base stockpiles to remove oversize and debris.
The result: Consistent road base that compacts properly.
Interchangeable screens: Swap screens to suit different road base specifications. One FlipScreen, multiple products from the same stockpile.
Why FlipScreen wins: A grizzly gives a rough cut only. FlipScreen gives you a consistent product from the excavator.
One machine, one operator: FlipScreen turns your excavator into a mobile screening plant for road base, with no loader feeding a separate screen.
Lower running costs: No extra plant, fuel or operators. Your excavator and FlipScreen handle the whole job.
Plug and play: Thanks to the Smart Valve system there's no complicated hydraulic set-up. Connect to your excavator and the valve looks after pressures and flows.
Bottom line: Better roads and lower material costs.

