[ FLIPSCREEN SCREENING BUCKETS ]
FlipScreen’s WL180 targets loaders in the 11–18 T class, providing reliable and efficient screening capability for everyday site operations.

Built for your worksite.
The FlipScreen WL180 gives larger loaders the ability to process substantial stockpiles while maintaining the mobility demanded by busy quarry, civil, demolition and recycling operations.
Rock-laden soil, sand, gravel, aggregate, road base, quarry material, crushed concrete and mixed excavation spoil can be screened where they are stored. Recovered products can then be loaded directly into trucks or separated into saleable and reusable stockpiles. Instead of moving every tonne to fixed screening equipment, the WL180 takes the screening capability to the work.
Screen where the material sits. Move only what matters.
Product videos
Technical Specifications
Confirm carrier compatibility, hydraulic requirements and final specifications with our team before ordering.
Minimum static tipping load
9,430 kg / 20,789 lb
Bucket opening
2450 x 600 mm / 96 x 24 in
Scoop size
1.80 m³ / 2.36 yd³
Total volume
5.40 m³ / 7.08 yd³
Weight
1,830 kg / 4,034 lb
Dimensions (L × W × H)
220 cm / 87 in
290 cm / 114 in
169 cm / 67 in
Hydraulic flow
147 L/min / 32.3 US gal/min
Hydraulic pressure
170 bar / 2467 psi
Inlet & outlet thread
1-7/16"-12 ORFS Male
Case drain thread
1/4" BSPP Female*
Screen area
6.8 m² / 73.2 ft²
Carrier size
11-18 t / 12.1-19.8 US tons
Tell us about your machine and the material you want to screen. Our team will help confirm the right setup for your application.
Not sure if this is the right model for your machine?
Take the guesswork out of choosing. Use the FlipScreen Product Selector to explore screening buckets matched to your machine, material and application.
